Program-controlled ashing

Program-controlled ashing introduction

Program-controlled ashing furnace incorporates a variety of new technologies

It is suitable for ash testing of many kinds of materials, such as food, plastic, coal, etc.

It can automatically complete the whole process of melting, carbonization and ashing.

It is a new product to replace the muffle furnace and common electric furnace

The furnace does not need an intermediate transfer and is ideal equipment that can automatically complete the whole ash experiment.

The A6 program-controlled ashing furnace has 9 kinds of material heating programs stored in it, which makes it easy to call the program operation for many different samples.

It can handle 6 samples at the same time during the experiment. It can be applied to multi-form samples such as powder, granule and liquid.

Heating bath: can handle 6 samples at the same time, the crucible is equipped with a lid to avoid dust, airflow and other interference

Program-controlled ashing furnace features.

1, program-controlled ashing furnace incorporates a variety of new technologies, including infrared radiation to enhance the heating efficiency; new insulation materials to reduce heat loss;

2、Special glass instead of refractory bricks to keep the furnace chamber clean and tidy, to avoid dust interference; programmed heating can be reduced

3、Manual operation, ash experiment is completed with one key.

4、Powder, particles, liquids and other multiform samples are applicable.

5, multi-order temperature-time program, according to the sample in the warming process to set.

6, open-ended design, easy to observe the changes in the sample during the heating process, but also in time to the carbonization process of smoke exhaust.

7、Many ash experiments test temperatures at 850℃ or below, designed to reach 900℃, covering the ash testing needs of most organic materials.

8、Can carry out multi-sample processing at the same time.

Program-controlled ashing furnace parameters.

Program-controlled ashing for PET samples three steps setting.

1、Melting temperature：280℃

2、Melting time：40min

3、Carbonization 1 temperature：350℃

4、Carbonization 1 time：30min

5、Carbonization 2 temperature：350℃

6、Carbonization 2 time：30min

7、Ashing temperature：850℃

8、Ashing time：60min

Program-controlled ashing configuration list